DRYER PARTS

This drum support shaft (part number WE3M33) is for dryers. Drum support shaft WE3M33 supports the drum at the dryer's back wall while allowing the drum to spin. Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Rotary start switch. Twist to remove and lock in place This rotary start switch (part number WE4X881) is for dryers. Rotary start switch WE4X881 starts the dryer when you turn it. Unplug the dryer before installing this part. Wear work gloves to protect...

Dryer drum seal for the lower front. If the seal is worn the drum glides are likely worn and may need to be replaced. See related items below.

DRYER STACKING KIT

Dryer drive belt. This is the most common GE/Hotpoint dryer belt. 87" long and 1/4" wide. 4 ridges.The drive belt dries out over time. If the dryer belt cracks or breaks, the dryer drum will not be able to turn. If the dryer motor is running, but the...

GE DRYER LP CONVERSION KIT (replaces WE25M0087) WE25M87 KIT NAT GAS TO PROPANE Part Information This liquid propane (LP) conversion kit (part number WE25M87) is for dryers. Dryer LP conversion kit WE25M87 converts a natural gas dryer to operate on...

ERP -- DC97-16782A - DRYER DRUM SUPPORT ROLLER (replaces DC97-07523A, DC97-07523B) Part Information This drum support roller (part number DC97-16782A) is for dryers. Drum support roller DC97-16782A holds the drum in place while the drum rotates on the...

GE -- DRYER IDLER PULLEY WE03X31620 This idler pulley (part number WE03X31620) is for dryers. Idler pulley WE03X31620 maintains correct tension on the drive belt to spin the drum. Disconnect the power before installing this part. Wear work gloves to...

This stacking kit (part number W10869845) is for laundry appliances. Stacking kit W10869845 includes the hardware and instructions for stacking a dryer on a washer. Follow the instructions included with the stacking kit.

Active PartAlso fits: #DE522, Whirlpool #690634.Replacement lint filter for standard & commercial gas & electric dryers produced since 1964. Screen size: 7-1/8" x 17-5/8"

Dryer timer assembly. If the timer will not advance in any cycle it might be bad and need to be replaced. Timer WE4M533 controls the electrical components and the duration of the dryer cycles. Unplug the dryer before installing this part. Wear work...

(ERP) -- 37001287 -- WHL WP37001287 DRYER IDLER PULLY ASSEMBLY (replaces 37001287) WP37001287 Part Information This idler assembly (part number WP37001287) is for dryers. Idler assembly WP37001287 includes the idler arm and the idler pulley that...