DRYER PARTS

Part Information Idler pulley and arm, dryer This idler assembly (part number 5304507499) is for dryers. Idler assembly 5304507499 includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn...

Part Information This idler pulley (part number WP40045001) is for washers. Idler pulley WP40045001 keeps tension on the drive belt to rotate the transmission. Unplug the washer before installing this part. Wear work gloves to protect your hands.

(ERP) -- 6-3700340 - WPL WP6-3700340 DRYER IDLER PULLEY (replaces 6-3700340) WP6-3700340 Part Information This idler pulley (part number WP6-3700340) is for dryers. Idler pulley WP6-3700340 maintains correct tension on the drive belt to spin the drum...

(ERP) -- 40111201 -- WHIRLPOOL-DRYER BELT-WP40111201 Part Information This drum belt (part number WP40111201) is for dryers. Drum belt WP40111201 attaches to the motor pulley and spins the drum as the motor rotates. Unplug the dryer before installing...

Part Information This drum belt (part number WE03X29897) is for dryers. Drum belt WE03X29897 attaches to the motor pulley and spins the drum as the motor rotates. Unplug the dryer before installing this part. Wear work gloves to protect your hands.

WE04X26139 -- GE DRYER HIGH-LIMIT THERMOSTAT - WE04X26139 Part Information This high-limit thermostat (part number WE04X26139) is for dryers. High-limit thermostat WE04X26139 shuts off the heating element or burner when the dryer overheats. Disconnect...

Dryer moisture sensor bar. This moisture sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry. If your moisture sensor is defective, the dryer may shut off too early or continue running for...

Part Information This push-to-start switch (part number WP3395382) is for dryers. Push-to-start switch WP3395382 starts the dryer when you press and release the button. Disconnect the power before installing this part. Wear work gloves to protect your...

This drum support shaft (part number WE3M33) is for dryers. Drum support shaft WE3M33 supports the drum at the dryer's back wall while allowing the drum to spin. Unplug the dryer before installing this part. Wear work gloves to protect your hands.

Dryer drum seal for the lower front. If the seal is worn the drum glides are likely worn and may need to be replaced. See related items below.

Dryer drive belt. This is the most common GE/Hotpoint dryer belt. 87" long and 1/4" wide. 4 ridges.The drive belt dries out over time. If the dryer belt cracks or breaks, the dryer drum will not be able to turn. If the dryer motor is running, but the...

ERP -- DC97-16782A - DRYER DRUM SUPPORT ROLLER (replaces DC97-07523A, DC97-07523B) Part Information This drum support roller (part number DC97-16782A) is for dryers. Drum support roller DC97-16782A holds the drum in place while the drum rotates on the...